CABINET MODIFICATIONS

Two triangular side boards and one backbox riser were added. Height of riser is 3 5/8”.

Side panels: ¾” Poplar lumber (actual thickness)

Backbox riser (3 5/8” tall) Poplar (3/4” actual thickness)

Hinge Location

Backbox folded down looking at top of spacer. Spacer is bolted to original metal backbox brackets.

To lengthen one cable I had to move the bottom power supply board ½” to the rear of the cabinet.

I also added a relief slot in front of spacer. A wider relief slot would be better for all cables.

You don’t see the relief slot when the backbox is up.

My hinges were made from deck hardware brackets.

Not necessarily pretty but they work well and aren’t noticeable when painted black.